Resawing turns a thick board into thinner slabs, veneers, or book-matched panels, but the quality of the result depends heavily on the saw’s capacity, blade control, and fence setup. The best band saws for resawing combine adequate throat depth with steady power and precise tracking.
This roundup includes full-size woodworking band saws, compact benchtop models, replacement blades, and accessories that can improve guidance and safety. Use the buying guide below to match the equipment to your stock size, shop space, and experience level.
Best 10 Band Saws for Resawing Picks for 2026
Heavy-Duty Resaw Choice
- 13-inch resaw capacity
- Cast-iron table and resaw fence
- Five-year warranty
Best For: Thick-stock resawing in home or small production shops
Resaw Blade Upgrade
Timber Wolf 111-Inch 3/4-Inch Blade
- 3 TPI for thick stock
- Low-tension operation
- Thin-kerf design
Best For: Compatible bandsaws used for dedicated resawing
Compact Workshop Pick
SKIL 9-Inch 2-Speed Benchtop Band Saw
- Compact benchtop format
- 2.8 amp induction motor
- Two-speed drive system
Best For: Light-duty woodworking in smaller shops
Maximum Capacity Pick
- 14-inch resaw capacity
- 1-3/4 HP dual-voltage motor
- Two blade speeds and quick-adjust fence
Best For: Large woodworking projects and tall-stock resawing
Best Budget Benchtop Pick
- 2.8-amp motor reaches 2,500 feet per minute
- 3-1/2-inch cutting depth and 9-inch width
- Includes fence, miter gauge, guard, and dust port
Best For: Beginners and DIY users handling smaller resawing projects
Best Workpiece-Control Accessory
- Applies side and top pressure near the cut
- Includes three common miter-slot cams
- Non-marring, replaceable silicone feather
Best For: Stabilizing thin or irregular stock during resawing
Best Higher-Capacity Benchtop Option
- 5-inch resaw height and 10-inch cutting width
- 580W motor with two-speed adjustment
- Cast-iron tilting table and two included blades
Best For: Thicker-stock resawing in home and small workshops
Best Resaw Fence Accessory
KMS7214 Bandsaw Resaw Guide Fence
- Helps compensate for blade drift
- 7-inch support surface for veneer cuts
- Fits compatible 14-inch fence systems
Best For: Improving control and accuracy on compatible 14-inch band saws
Best Compact Resawing Band Saw
- 3-1/2-inch resaw capacity
- Compact 40-pound benchtop design
- Includes fence and miter gauge
Best For: Small workshops handling light resawing and general wood cuts
Best High-Capacity Resawing Band Saw
- Up to 13-inch cutting height
- 2 HP motor with dual speeds
- Large tilting cast iron table
Best For: Deep resawing and larger woodworking stock in a dedicated shop
Heavy-Duty Resaw Choice – JET 14-Inch 1.75 HP Band Saw
For demanding band saws for resawing projects, the JET JWBS-14SFX combines a 13-inch resaw capacity with a 1.75 HP motor. Its cast-iron table, included resaw fence, and adjustable blade guides make it suited to thick hardwood, softwood, and manufactured board in a home or small production shop.
Best For: Woodworkers resawing thick slabs, bookmatched panels, or veneer who want a substantial floor-standing machine.
Pros:
- 13-inch resaw capacity handles thick stock in one pass.
- 1.75 HP motor and 14-inch wheels support demanding cuts.
- Includes a steel stand, machined-aluminum resaw fence, and dual dust ports.
- Five-year warranty and parts support add long-term value.
Cons:
- At 272 pounds, it is not easy to reposition.
- The blade is sold separately.
- A 20A circuit is recommended.
The JET is a strong choice when resaw capacity and shop stability matter more than portability. Its included stand and fence make it a more complete setup, though buyers should budget for a suitable blade and electrical installation.
Resaw Blade Upgrade – Timber Wolf 111-Inch 3/4-Inch Blade
A suitable blade is essential for band saws for resawing, and this Timber Wolf blade is designed specifically for thick stock. Its 3/4-inch width, 3 TPI tooth pattern, thin kerf, and low-tension operation target cooler, efficient resaw cuts.
Best For: Woodworkers outfitting compatible bandsaws with a dedicated thick-stock resaw blade.
Pros:
- 3 TPI configuration is suited to resawing thick stock.
- 111-inch length fits compatible bandsaws.
- Low-tension design requires less horsepower.
- Thin kerf and high-silicon, low-carbide steel support efficient cutting.
Cons:
- Compatibility depends on the saw accepting a 111-inch, 3/4-inch blade.
- It is a blade only, not a complete bandsaw solution.
- The coarse tooth pattern is specialized for resawing rather than fine detail work.
This blade makes sense as a purpose-built accessory for a compatible saw. Confirm the required blade length, width range, and wheel capacity before ordering, then use it for thick-stock work rather than general-purpose cutting.
Compact Workshop Pick – SKIL 9-Inch 2-Speed Benchtop Band Saw
The SKIL BW9501-00 is a compact option among band saws for resawing, with a 2.8 amp induction motor and two-speed drive system. Its benchtop format, quick blade-tension setting, tracking sight window, and dust port make it practical for smaller woodworking spaces, though its notes do not specify a resaw capacity.
Best For: Beginners and hobbyists who need a space-conscious woodworking bandsaw for lighter-duty cutting.
Pros:
- Compact benchtop design suits limited shop space.
- Two-speed drive system supports different cutting needs.
- Ball-bearing blade guides and tracking sight window aid accuracy.
- Includes a miter gauge, dust port, and steel base.
Cons:
- The supplied information does not state a dedicated resaw capacity.
- Its 2.8 amp motor is less substantial than the larger floor-standing models here.
- It uses a 9-inch blade, limiting the scale of suitable work.
The SKIL is better viewed as an entry-level woodworking bandsaw than a specialized thick-stock resaw machine. Choose it for compact, general workshop use, and verify the required cutting height before planning substantial resaw projects.
Maximum Capacity Pick – RIKON 14-Inch Deluxe Bandsaw
The RIKON 10-1414 stands out among band saws for resawing with a 14-inch resaw capacity and 13-5/8-inch cutting width. Its 1-3/4 HP dual-voltage motor, two blade speeds, quick-adjust drift fence, and tool-less guides are aimed at larger woodworking projects and controlled thick-stock cuts.
Best For: Serious woodworkers who want maximum listed resaw height and flexible speed settings.
Pros:
- 14-inch resaw capacity handles exceptionally tall stock.
- Dual-voltage motor runs on 115V or 230V.
- Two blade speeds accommodate different cutting applications.
- Includes a quick-adjust drift fence, cabinet, and tool-less blade guides.
Cons:
- Its 76-inch overall height requires substantial shop space.
- The supplied information does not specify a warranty duration despite listing a lifetime warranty type.
- Large capacity and cabinet configuration make it less portable.
For buyers prioritizing resaw height, the RIKON offers the largest stated capacity in this group. Its dual-voltage motor and fast guide adjustments add flexibility, while the tall cabinet footprint favors a permanent woodworking setup.
Best Budget Benchtop Pick – WEN 9-Inch Band Saw
The WEN BA3959 is a compact, approachable option for shoppers comparing band saws for resawing in a home workshop. Its 2.8-amp motor reaches 2,500 feet per minute, while the 3-1/2-inch cutting depth and 9-inch cutting width suit smaller stock and general woodworking tasks.
Best For: Beginners and DIY woodworkers who want a compact benchtop saw for light resawing, curves, and routine cuts.
Pros:
- Compact 9-inch benchtop design with a 12-1/4 x 11-7/8-inch table.
- Accepts 59-1/2-inch blades from 1/8 to 3/8 inches wide.
- Includes a rip fence, miter gauge, adjustable blade guard, and 2-1/2-inch dust port.
- Beveling table adjusts up to 45 degrees and the saw includes a two-year warranty.
Cons:
- Its 3-1/2-inch cutting depth is more limited than larger benchtop models.
- The 2.8-amp motor is better suited to smaller work than demanding thick-stock resawing.
Choose the WEN when workspace, simplicity, and value matter more than maximum resaw capacity. It provides useful accessories and basic bevel capability, but thicker boards may require a more powerful saw.
Best Workpiece-Control Accessory – BOW GuidePRO Featherboard
The BOW GuidePRO GP5 is an accessory rather than a saw, but it can improve control when using band saws for resawing. Its silicone featherboard applies side and top pressure before the blade, helping stabilize thin, irregular, or smaller workpieces while dampening vibration.
Best For: Woodworkers who want steadier feeding and added workpiece control on compatible band saw tables.
Pros:
- Non-marring silicone feather helps grip flat, thin, and irregular stock.
- Includes 15mm, 5/8-inch, and 3/4-inch miter cams.
- Sliding base fits miter-slot positions 2 to 8 inches from the blade.
- Replaceable feather and ergonomic locking handle support repeatable setup.
Cons:
- It is a control accessory, not a standalone band saw.
- Compatibility depends on the table’s miter-slot size and position.
- Taller-stock use may require the separately mentioned Extension Kit or Anchor Bar.
For resawing smaller or awkward pieces, the GuidePRO can add useful pressure and stability between your hands and the blade. Verify your table dimensions and slot arrangement before buying.
Best Higher-Capacity Benchtop Option – 10-Inch Two-Speed Band Saw
This 10-inch benchtop model is aimed at shoppers who need more room than entry-level band saws for resawing typically provide. Its stated 5-inch cutting height, 10-inch cutting width, 580W motor, two speeds, and cast-iron table make it suited to thicker boards and demanding home-shop work.
Best For: Home and small-shop users resawing thicker stock who want increased capacity, speed selection, and a substantial work table.
Pros:
- Provides a stated 5-inch resaw height and 10-inch maximum cutting width.
- 580W pure-copper TEFC motor includes two-speed adjustment and overheat protection.
- Cast-iron table tilts from -5 to 45 degrees for bevel and compound-angle work.
- Includes two blades, quick tension adjustment, ball-bearing guides, laser guide, LED lighting, and a 2-1/2-inch dust port.
Cons:
- The larger capacity and cast-iron construction may require more bench space than compact models.
- Supplied details list some features but do not specify the brand or complete dimensions.
- Its broad feature set may be more than needed for occasional light-duty cutting.
If your priority is resaw capacity, this model stands out among the listed options with a 5-inch cutting height and two-speed motor. Its included blades and work-lighting features also make it appealing for users who want a more fully equipped benchtop setup.
Best Resaw Fence Accessory – KMS7214 Bandsaw Resaw Guide Fence
For woodworkers improving their band saws for resawing, the KMS7214 adds a guided, adjustable support surface to compatible 14-inch band saw fences. Its curved face is designed to help compensate for blade drift and support straighter veneer and stock cuts.
Best For: Hobbyists, DIY woodworkers, furniture makers, and shops using a compatible 14-inch fence system for more controlled resawing.
Pros:
- Seven-inch vertical guide surface supports veneer and resaw cuts.
- Curved guide face allows controlled left- or right-hand workpiece steering.
- Anodized aluminum and reinforced steel construction is designed for repeated use.
- Bolt-on installation is straightforward on compatible fences with T-tracks.
Cons:
- It is an accessory, not a complete band saw.
- Compatibility depends on having the KMS7200 system or a suitable 14-inch fence with mounting T-tracks.
The KMS7214 is a focused upgrade for users who already have a compatible band saw fence. It can improve workpiece control during resawing, but buyers should verify fitment before ordering.
Best Compact Resawing Band Saw – JET 9-Inch Benchtop Band Saw
The JET JWBS-9 is a compact option for shoppers looking at band saws for resawing in a smaller workshop. Its 3-1/2-inch resaw capacity, 9-inch throat, precision blade guides, and included fence make it suited to lighter woodworking and general shop cuts.
Best For: Beginners and compact-shop users who need a benchtop saw for wood, wood composites, curves, and modest resawing tasks.
Pros:
- 3-1/2-inch resaw capacity accommodates smaller stock.
- Compact 40-pound design can bolt to a workbench or stand.
- Cast aluminum wheels and precision guides support consistent blade tracking.
- Tilting table provides bevel cuts from 0 to 45 degrees.
Cons:
- Its resaw capacity is limited compared with larger 14-inch machines.
- Mounting bolts, washers, and nuts are not included.
- It is intended for wood and wood composites rather than general-purpose metal cutting.
The JWBS-9 makes sense when workspace and portability matter more than deep resaw capacity. Its included fence and miter gauge add versatility, while the five-year woodworking machinery warranty provides additional ownership support.
Best High-Capacity Resawing Band Saw – QD-KYOHO 14-Inch Bandsaw
For demanding band saws for resawing applications, this 14-inch QD-KYOHO model offers a 2 HP motor, dual speed settings, and up to 13 inches of cutting height. Its large cast iron table and adjustable blade guides are aimed at stable, higher-capacity woodworking cuts.
Best For: Woodworkers who need deep resaw capacity, a large work surface, and adjustable speeds for hardwood and softwood projects.
Pros:
- Up to 13 inches of cutting height and 13-5/8 inches of throat width.
- Two speed settings provide 1,445 FPM for hardwoods and 2,950 FPM for softwoods.
- 2 HP, 14-amp motor supplies substantial power for woodworking cuts.
- Cast iron table tilts 45 degrees right and 5 degrees left.
Cons:
- Its 34-by-25-by-74-inch footprint requires considerable shop space.
- The supplied product is listed as a bare tool, so accessories may need separate consideration.
- Its large size and 14-amp electrical requirement may be excessive for occasional users.
This model is the strongest fit here for deep resawing and larger stock. The dual-speed setup, overload protection, and quick blade-tension adjustment add practical flexibility, but its substantial footprint is best suited to a dedicated workshop.
How We Picked the Best Band Saws for Resawing
We focused on the features that matter most when making tall, straight cuts through hardwood: resaw capacity, motor power, blade speed, frame rigidity, guide adjustment, and fence compatibility. We also considered benchtop models for lighter work and included blades and guides that can significantly affect results. Because a complete resawing setup is more than the saw alone, accessories were evaluated for their usefulness in maintaining control and improving cut consistency.
Quick Comparison
Full-size 14-inch models generally provide the greatest resaw capacity and the most stable platforms for wide boards. The JET and RIKON options are aimed at serious woodworking, while the larger dual-speed 14-inch saw offers another high-capacity configuration. Nine- and 10-inch benchtop saws take up less space and suit thinner stock, smaller projects, and occasional use. A quality resaw blade, featherboard, or dedicated fence can improve performance, but accessories cannot compensate for insufficient capacity or an underpowered motor.
Key Buying Factors for Band Saws for Resawing
Resaw Capacity and Throat Depth
Check the maximum height under the upper guide, not just the wheel diameter. Choose a capacity that exceeds your typical board thickness so you can work comfortably and leave room for setup errors.
Motor Power and Blade Speed
More power helps the blade maintain speed in dense hardwood, especially during tall cuts. Variable or dual-speed operation can be useful when switching between resawing, curves, and softer materials.
Blade Width, Tooth Count, and Tracking
A wide blade with an appropriate tooth pitch is usually more stable for resawing than a narrow scrolling blade. Look for reliable tensioning, accessible tracking controls, and guides that support the blade without excessive friction.
Fence and Workpiece Control
A tall, rigid fence helps keep boards aligned through the cut. Resaw guides and featherboards can improve consistency, but they should be adjusted so they control the stock without forcing it sideways into the blade.
Footprint, Dust Collection, and Safety
Measure your available space, including room to feed long boards. Dust ports, a stable base, guarded wheels, and easy-to-reach controls are practical advantages for frequent use. Always use eye protection and keep hands clear of the blade path.
Who Should Buy Which Band Saws for Resawing?
Choose a full-size 14-inch saw if you regularly resaw thick hardwood, make veneers, or need maximum stability. A 9- or 10-inch benchtop model is better for occasional resawing, thinner boards, and compact workshops. Beginners may benefit from a simpler benchtop saw paired with a dependable blade and carefully aligned fence. Experienced woodworkers should prioritize capacity, frame rigidity, blade tension, and a robust resaw fence. If your current saw has adequate power but produces inconsistent cuts, upgrading the blade, fence, or featherboard may deliver better value than replacing the machine.